...
FYI: Each library should receive a list of e-books, from JSTOR, that the library has selected. These are owned by the individual library and should be activated locally in the IZ.
...
...
CDI - Settings and configurations to check before opening ExL Support Case:
CDI in the Network Zone can be updated by the library CDI liaison, using the NZ CDI.
Update CDI settings/activations
Ex Libris has a useful Tips and Tricks document that helps troubleshoot where links are originating, see what records are in a CDI collection, and the source of the CDI record.
If the CDI collection(s) require link configuration or proxy, check the settings in the Discovery module:
After troubleshooting the settings, the configurations, analysis and the link still does not work, open an ExL SalesForce case.
Example below: The CDI link for Gale is has a bad link (sid=summon&u=xxxx) since the sid should be “primo” and the “u=” should be the Gale ID for the library. In this case, the same library ID is being applied to all libraries, causing a linking issue.
...
CDI Inheritance:
If your library sees this message: "This institution is not inheriting Network Zone CDI activations,” this indicates that the library is not inheriting CDI Databases (zero-title collections) from the Network Zone. All libraries are inheriting CDI collections that have portfolios. CDI settings can be updated in both the IZ and NZ. There is a CDI login for the Network Zone that will allow the CDI liaison to update settings for the library.
...